mimaki jv3 Eco Solvent printhead (DX4)-M004372
To be used with:
Mimaki jv3 (jv3-130, JV3-130sp, JV3-160, JV3-160sp, JV3-250, JV3-250sp etc.)
Roland SOLJET ProII SJ-540 ,SJ-645EX ,SJ-655EX ,SJ-740 ,SJ-745EX ,SJ-1045EX , SJ-1000 ,SC-540 ,SC-545EX ,
Roland VersaCAMM SP-300V , SP-540V , VP-300 , VP-300I ,VP-540 , VP-540I ,
Roland SOLJET PRO III XJ-640 , XJ-740 , XC-540 , XC-540W , XC-545MT ,
Roland VersaArt RS-640
Mutoh RH-II(Falcon2), RH-3, RJ-8000 , Spitfire 65, Spitfire 90, Blizzard 65, Blizzard 90.
Remarks: Original

This printhead assy is suitable for the Mimaki JV34-260 printers. The JV34-260 Printhead ID Set has a native resolution of 360 dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.

This complete original Mimaki JV33/JV5 printhead is suitable for the Mimaki solvent printer series. The Mimaki JV33/JV5 printhead has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.

SKU: PH-ROL-DX4-M

This Mimaki ts34/jv34 printhead Print head assy is suitable for the Mimaki JV34-260 printers. This Mimaki print heads has a native resolution of 360 dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.

This Mimaki JV33/JV5 printhead is suitable for the Mimaki solvent printer series. The Mimaki JV33/JV5 printhead has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.

This printhead GEN5 is suitable for Mimaki JFX200-2513 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M017004 replacing M015028)

This Ricoh GEN4 (MH2420), 384 channels, 30 kHz, 7 picoliter, greyscale printhead is suitable for Mimaki UJF-3042 printers. This printhead has an integrated heater and thermistor. This is the Ricoh original printhead, covered by a manufacturer warranty.

This GEN5 (MH5420/5440) Assy Packaging is suitable for Mimaki SWJ-320 printers. This is the original Mimaki part (number M012639). This packaging contains the assembly including tubes, valves, ink connectors and brackets.

Mimaki part (number M015372 replacing number M015307). The cables of this printhead are 354mm long and 30mm wide.

This original Mimaki JV33/JV5 printhead is suitable for the Mimaki solvent printer series. The Mimaki JV33/JV5 printhead has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.

This printhead GEN5 is suitable for Mimaki JFX200-2513 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M017004 replacing M015028).